Differential Pressure-Type Secondary Measurement Leak Tester with Work Comparison Individual Judgment Method.[Patent]
Features
- Equipped with 16 channels that can adapt to various types of works.
- Equipped with checking functions, such as correction (manual / automatic) and error checking.
- Less tact time since it measures two works(Less by 1.5~2 times)
- Very effective for products that are sensitive to temperature such as gunmetal, thin SPC material and aluminum material that has wider surface area.
- Number of lot rejection can be reduced by half in case of multi-picking.
- Can make individual judgment with the indication of “OK” and “NG”.
- It allows one operator to operate several testers.
- Able to measure properly even if the amount of leakage is the same.
Functions
Automatic Zero Adjustment | The reading just before measurement is automatically adjusted to zero. |
---|---|
Noise Compensation | The measuring noise from the object to be measured is compensated. Manual/automatic |
Judgment Signal | The OK/NG signal after judgment is output in a form of pulse. |
Check Functions | Self diagnosis functions for valve, sensor, test pressure, etc. |
Output | The judgment (OK/NG) can be output via USB port. |
Option | Electric pneumatic regulator |
Specifications
Power | 100 VAC 50/60Hz Optional depending on region:220 VAC, etc. | |
---|---|---|
Test Pressure | -100kPa~1700kPa | |
Difference Pressure | 1Pa | |
No. of Channels | 16CH | |
Timer | 0 – 999.9 sec. | |
Primary Pressure | Test Pressure +100kPa | |
Piping Diameter | Rc(PT)1/4 | |
I/O | For control OK/NG, Start, Stop, Channel selection, etc. | |
Temperature Range | 0~50℃ | |
Dimension/Weight | H: 320mm W: 300mm D: 520mm 20kg | |
Language of indication | English/Chinese |